ST60 LCC Silicon

Jun 11, 2023

Need more information?

Let us help you with your inquiries, brochures and pricing requirements

The ST60 LCC is a single-channel silicon-based thermopile that comes in a LCC package for surface mount assembly with a small active area of 0.61 x 0.61mm.

With a low temperature coefficient of responsivity of -0.04%/°C, the thermopile detector has a time constant of 18ms with nitrogen encapsulation gas. It exhibits a very short thermal shock response to changes in the ambient temperature.

The ST60 LCC offers the following benefits:

The options available include:

The following are the applications of ST60 LCC:

The technical specifications of the ST60 LCC are summarized in the following table:

General Specifications: Flat spectral response from 100nm to > 100μm. Linear signal output from 10-6 to 0.1W/cm2. Maximum incident radiance 0.1W/cm2, damage threshold ≥ .5W/cm2

Notes: (1) Parameter is not 100% tested. 90% of all units meet these specifications. (2) A is detector area in cm2. (3) Test Conditions: 500K Blackbody source; Detector active surface 10cm from 0.6513cm Diameter Blackbody Aperture.

The general specifications of the ST60 LCC are listed below:

1M Thermopile Detector from Dexter

2M Quad Thermopile Detector

3M Thin Film-Based Single Element Thermopile Detector

DexTemp™ 1000 Non-Contact Infrared Temperature Monitor

Digital ST120 Dual Thermopile (Preliminary)

DR34 - Compensated Thin-Film Thermopile Detector

S60M TO-18 Single-Channel Silicon-Based Thermopile

ST150 Single-Channel Silicon-Based Thermopile Detector

ST60 Quad Thermopile Detectors from Dexter

ST60 TO-18 Thermopile Detectors from Dexter